2200-37 , THRUSH PRESSURIZER™ - PB SERIES

DOWNLOADS
	O & M - Pressure Booster (PB) Systems
	Brochure - PB
	PB-60, 75, 95 & 100 3 Phase Power Standard Construction
	3D Drawing - DXF
	3D Drawing - IGES
	3D Drawing - STEP AP214

3D Drawings

PB Model	PB-75-2
Tank	STD
Horsepower	5 hp
Factory Wired	230 V
Phase	3
Starter Panel	Yes
Shipping Weight	294 lb
Frequence	60 Hz
Connection Size Inlet	1.5 in
Connection Size Outlet	1.5 in
Length	41.5 in
Width	22.5 in
Height	41 in
Tank Vol.	40 gal
Tank Acc.	0.75
Max. Flow	75 gal
Max. Regulated Boost	50 psig
Min. Suction Press.	5 psig
Pressure Switch Range	20 - 80 psig
Factory Differential Setting	20 psig
Pump cut-in	40 psig
Pump cut-out	60 psig
Factory PRV Discharge Setting	50 psig
Factory Tank Pre-charge	38 psig
Maximum Operating Conditions	125 psig at 120 °F
Pump Model	1.25 x 1.5 x 7 HPC e300
PRV Model	Thrush 1.5 in Boostrol
Panel Enclosure	NEMA 1
Panel Electrical Characteristics	230V / 60 Hz / 3 Ph
Tank Model	DWT-150V, 40 Gallon
Tank Diaphragm	Heavy Duty Butyl, NSF-61 Approved
Tank Liner & Exterior	Corrosion resistant epoxy
Skid Material	Formed steel, powder coated

PB Model	PB-75-2
Tank	STD
Horsepower	5 hp
Factory Wired	230 V
Phase	3
Starter Panel	Yes
Shipping Weight	294 lb
Frequence	60 Hz
Connection Size Inlet	1.5 in
Connection Size Outlet	1.5 in
Length	41.5 in
Width	22.5 in
Height	41 in
Tank Vol.	40 gal
Tank Acc.	0.75
Max. Flow	75 gal
Max. Regulated Boost	50 psig
Min. Suction Press.	5 psig
Pressure Switch Range	20 - 80 psig
Factory Differential Setting	20 psig
Pump cut-in	40 psig
Pump cut-out	60 psig
Factory PRV Discharge Setting	50 psig
Factory Tank Pre-charge	38 psig
Maximum Operating Conditions	125 psig at 120 °F
Pump Model	1.25 x 1.5 x 7 HPC e300
PRV Model	Thrush 1.5 in Boostrol
Panel Enclosure	NEMA 1
Panel Electrical Characteristics	230V / 60 Hz / 3 Ph
Tank Model	DWT-150V, 40 Gallon
Tank Diaphragm	Heavy Duty Butyl, NSF-61 Approved
Tank Liner & Exterior	Corrosion resistant epoxy
Skid Material	Formed steel, powder coated